OnLeaks


'OnLeaks' Articles

Alleged Leaked CAD Image Suggests 'iPad mini 5' Will Just Be a Specs Bump

Serial tech leaker Steve Hemmerstoffer (@OnLeaks) claims to have received an alleged CAD rendering of Apple's so-called "iPad mini 5," rumored to be launching in the Spring. Hemmerstoffer has yet to share the image, but assuming the leak is legit, he says it suggests there will be no major design changes to the next-generation iPad mini, save for a "relocated mic, centered on the upper back panel." Suggestions that the new iPad mini will look virtually the same as the last model is likely to disappoint some fans of Apple's smaller form factor tablet who may have been hoping for an iPad Pro-style redesign with Face ID and an edge-to-edge display. However, today's development is in line with multiple reliable sources that claim Apple will release a new version of the iPad mini with affordability in mind, suggesting only upgraded internal specs and a lower-cost display panel in a similarly sized chassis. The 7.9-inch tablet is also expected to continue to have a Lightning connector, Touch ID, and a 3.5mm headphone jack. Just got my hands on alleged #iPadMini5 CAD. If legit (can't vouch at 100%), there is indeed (just as rumored) no external design changes (except of relocated mic, centered on upper back panel). In short, it will very likely be a specs bump only update... pic.twitter.com/z5XuBKZVmN— Steve H.McFly (@OnLeaks) February 19, 2019 On the upside, details gleamed from an iOS developer beta could hint that Apple's new iPad mini will feature support for the Apple Pencil and Smart Keyboard. Rumors have

Wireless AirPods Charging Case Expected Soon, but AirPods 2 May Not Launch Until Fall

OnLeaks' Steve Hemmerstoffer today tweeted that the AirPods wireless charging case will be ready to launch sometime soon, but the actual AirPods 2 with "Hey, Siri" funtionality may be delayed to the fall. OnLeaks itself casts some doubt on this rumor, by stating up front that the news was gained from a "new and yet unconfirmed," but seemingly reliable source. Hemmerstoffer appears to be most certain about the wireless charging case launching soon and being shipped with the first-generation AirPods. Some #AirPods2 details I got from a new and yet unconfirmed but seemingly reliable source. Thus, I can't vouch these at 100%...- New wireless charging #AirPods Case to be launched soon BUT shipped with current AirPods- Brand new AirPods + new color(s) likely unveiled this fall pic.twitter.com/eNYom3Xys6— Steve H.McFly (@OnLeaks) February 12, 2019 Most rumors about AirPods 2 have pointed toward an early 2019 launch for the new wireless earphones, so definitely take this new report with a grain of salt. Just this morning, a sketchy report from Greek tech news site iphonehellas.gr claimed the new iPads, AirPods 2, and AirPower are all set to launch on March 29. Yesterday, DigiTimes reiterated previous rumors that stated Apple will release AirPods 2 in the first half of the year. When they do launch, OnLeaks says the AirPods 2 will come in new colors, and yesterday rumor site MySmartPrice claimed that the new headphones will come in black and white. Beyond

2019 iPhone's Triple-Lens Rear Camera Design Allegedly Showing in New Renderings

Serial phone leaker Steve Hemmerstoffer has partnered with Indian tech site Digit to release some new renderings claimed to be of the next-generation iPhone, presumably scheduled to launch around September of this year. The distinguishing feature of the renderings is the rear camera, which is a large, unusual-looking patch housing three lenses in a triangular configuration, a flash, and a microphone. Given the extremely odd appearance, we'd ordinarily dismiss such renderings out of hand unless additional evidence surfaced, but Hemmerstoffer has a long track record of sourcing information from the supply chains of Apple and other phone manufacturers. He does, however, acknowledge that this is a "freakingly early leak" and plans may change before the phone design is finalized. At least one of this year's iPhone models is rumored to include a triple-lens rear camera, although early rumors are split on just what the third lens would be used for. Some sources have indicated Apple is working on "time-of-flight" depth sensing for higher-quality augmented reality experiences, but reliable analyst Ming-Chi Kuo is skeptical that the technology will make it into Apple's 2019 iPhones. A more traditional third camera lens could still be used for other purposes, however, such as for improving low-light performance or offering improved optical zoom capabilities. Phone manufacturers have recently been racing to boost their camera lens counts to three, four, or even five in an arms race to make their devices stand out with unique features. Apple, however, has chosen to

New iPad Pro Renders Depict Angular Chassis and iPhone-Like Antenna Lines

Serial mobile leaker Steve Hemmerstoffer shared high-resolution renders today, courtesy of tech blog MySmartPrice, that are based on supposed leaked CAD images of Apple's upcoming redesigned iPad Pro. Reliable Apple analyst Ming-Chi Kuo has said Apple is working on two new iPad Pro models that take design cues from the iPhone X, measuring in at 11 and 12.9-inches. In addition to the thinner bezels, no Home button, and edge-to-edge display of the expected iPad Pro design, the mocked-up renders depict a device with an angular chassis boasting iPhone 4-style chamfered edges, rather than the rounded chassis of the current-generation tablet. In another seeming nod to Apple's evolving iPhone handset design, the device is shown with separate antenna strips along the top and bottom edges of the chassis, instead of the single continuous antenna lines on either side of the existing cellular models. Elsewhere, a closer look reveals a distinct lack of headphone jack, two rows of speaker vents on either side of the Lightning port – similar to the alleged CAD images leaked last month – and two microphone ports located above the TrueDepth camera embedded in the bezel. Also like the CAD image before it, a Smart Connector is positioned on the back of the device directly above the Lightning port, instead of the landscape orientation on current iPad Pro models. MySmartPrice claims the positioning is related to the limitations of Face ID in landscape orientation, however well-connected Bloomberg reporter Mark Gurman has said horizontal Face ID support is a feature

OnLeaks: Budget iPhone X to Have 6-Inch Screen With Notch, Single Rear Camera, and Aluminum Frame

Apple is widely rumored to release what will essentially be a lower-priced but lesser-featured iPhone X later this year. Ahead of then, renders have surfaced that may reveal what the device will look like. Steve Hemmerstoffer, who runs the OnLeaks account on Twitter, has teamed up with the blog MySmartPrice to share photos and a video of the alleged 6.1-inch iPhone, expected to be announced in September alongside the second-generation iPhone X and a larger 6.5-inch model dubbed the iPhone X Plus. In addition to the 6.1-inch display, the renders suggest the device will have a notch like the iPhone X, presumably for Face ID given the lack of a home button. The device also has a glass back, making wireless charging a possibility, and an aluminum frame like the iPhone 8 and iPhone 8 Plus. The renders also suggest the device will sport a single rear camera, whereas the iPhone X has a dual setup with telephoto and wide-angle lenses. The rest of the device is par for course for an iPhone, with a Lightning connector and speaker grilles along the bottom, volume buttons and a mute switch along the left side, and a power button on the right side. The renders corroborate information previously shared by former KGI Securities analyst Ming-Chi Kuo, who also said the 6.1-inch iPhone will feature a single-lens rear camera and aluminum frame. He also said it will have an LCD, 3GB of RAM, and perhaps most interesting of all, apparently lack 3D Touch. Kuo said the 6.1-inch iPhone will be priced from between $700 and $800 in the United States, so tradeoffs were

New 'iPhone 8' Renders Shared Online Based on Alleged Leaked CAD Images

Mobile phone leaker @OnLeaks and tech blog @GearIndia posted a series of high-quality renders on Tuesday that claim to be based on leaked factory CAD images of Apple's upcoming OLED iPhone. The images offer perhaps the clearest idea yet of how Apple's redesigned "iPhone 8" with edge-to-edge display may look with the screen powered off, if the company does indeed choose to sign off on a stainless steel-edged, all-glass design. The renders are based on the expectation that the iPhone 8 will be 144mm tall, 71mm wide, and 7.7mm thick, making it slightly larger than an iPhone 7 but smaller than an iPhone 7 Plus, and slightly thicker than both. The pictures show the smooth front glass of the edge-to-edge OLED display, which is expected to lack any sort of button indentation in favor of an entirely virtual home button. The only visible features appear in a bezeled run-off area housing the microphone hole and a dual-lens front-facing camera, which is rumored to include 3D sensing capabilities, potentially for use in facial/iris recognition or future augmented reality functionality. On the back we can see the widely-rumored vertical orientation of a slightly protruding dual-lens camera, a change from the horizontal arrangement used on the iPhone 7 and 7 Plus. The placement of the Touch ID sensor isn't made explicit on these CAD-based renders and remains the biggest question mark concerning Apple's plans. Sources suggest the company has struggled to embed the Touch ID technology in the OLED display because of production challenges, which may force it to re-locate

New iPhone 7 and 7 Plus Drawings: Dual Camera and Smart Connector Exclusive to 5.5-Inch Model

Less than four months before Apple is expected to announce the iPhone 7 and iPhone 7 Plus, which may have a "Pro" moniker instead, purported new blueprints of the smartphones have been shared by uSwitch on behalf of noted leaker Steve Hemmerstoffer, who runs the Twitter account OnLeaks. The drawings, purportedly sourced directly from Taiwan-based Apple casing subcontractor Catcher Technology, seemingly confirm that Apple plans to remove the 3.5mm headphone jack on both the iPhone 7 and iPhone 7 Plus. Both smartphones will also retain protruding cameras, but without the metal ring around the lenses. Meanwhile, the drawings show that Apple plans to add a dual-lens camera system and Smart Connector exclusively to the 5.5-inch iPhone 7 Plus, much to the chagrin of some customers that are hopeful Apple will not differentiate features beyond screen size. The 4.7-inch iPhone 7 will supposedly retain a single-lens camera. The report also corroborates rumors claiming Apple will reposition the rear antenna bands along the top and bottom of its next iPhones, but the drawings also stifle stereo speaker rumors with only a single speaker grille shown on both the iPhone 7 and iPhone 7 Plus. Each smartphone retains a Lightning port and bottom microphone. Both the iPhone 7 and iPhone 7 Plus look similar to the iPhone 6 and iPhone 6s series, suggesting that Apple will retain the same overall smartphone design beyond minor tweaks for three consecutive years. The report confirms the new iPhones will have identical dimensions as the current 4.7-inch and 5.5-inch models.