Check Out This Functional 3D Printed Macintosh

Designer Kevin Noki recently spent several weeks creating his own homemade, functional Macintosh built from the ground up, which he dubbed the "Brewintosh." Designed to look like the Macintosh Plus, the machine Noki crafted features a 3D printed exterior and components, and it works like the real deal.


In a 47-minute video, Noki walks through the process that he used to create the device. As Ars Technica points out, Noki went completed more than 29 complex steps, each of which was a major task on its own. He started out by measuring every single surface and angle of a Macintosh Plus, modeling it in AutoDesk Fusion 360, and then printing the parts, putting them together, filling gaps, sanding, and texturing.

He modified a 10-inch thrift store screen to have LED backlighting and a dimmer knob, he crafted a power assembly, built in connectors, speakers, and other hardware, and designed a Mini vMac emulator using Linux. The whole process is fascinating to watch.

The Mac Plus is the exact right size and texture, it supports 3.5-inch disks, it supports appropriate Apple keyboards and mice, and has every other detail you would expect from a real Mac. Printing the components took over 48 hours, and the whole project spanned months.

Popular Stories

ios 19 messages app

Apple Sues Jon Prosser Over iOS 26 Leaks

Thursday July 17, 2025 8:40 pm PDT by
Earlier this year, YouTuber Jon Prosser shared multiple videos showing off what he claimed to be re-created renderings of what was then presumed to be called iOS 19 and which was eventually unveiled by Apple as iOS 26 at WWDC in June. In his first video back in January, Prosser showed off a Camera app redesign with a simpler set of buttons for moving between photo and video modes, and he...
iPhone 17 Pro on Desk Centered 1

iPhone 17 Pro Launching in Two Months With These 16 New Features

Thursday July 17, 2025 8:33 am PDT by
Apple's next-generation iPhone 17 Pro and iPhone 17 Pro Max are less than two months away, and there are plenty of rumors about the devices. Below, we recap key changes rumored for the iPhone 17 Pro models.Aluminum frame: iPhone 17 Pro models are rumored to have an aluminum frame, whereas the iPhone 15 Pro and iPhone 16 Pro models have a titanium frame, and the iPhone X through iPhone 14 Pro ...
iPhone 17 Pro Dark Blue and Orange

Ranked: The Best Features Rumored for the iPhone 17 Lineup

Wednesday July 16, 2025 4:17 pm PDT by
We have just under two months to go until the debut of Apple's iPhone 17 models, and rumors have been ramping up in recent weeks. We went through everything we know so far, pulling out the most exciting rumors and highlighting some other changes that aren't going to be so great. Top Tier Ultra Thin iPhone 17 Air - The iPhone 17 Air is 2025's most exciting iPhone rumor, because it's the...
Foldable iPhone 2023 Feature Homescreen

Foldable iPhone's Thickness and Price Range Detailed in New Reports

Wednesday July 16, 2025 11:31 am PDT by
Apple's long-rumored foldable iPhone will likely have a starting price between $1,800 and $2,000 in the U.S., analysts at investment banking firm UBS said this week. If so, the foldable iPhone would cost more than a MacBook Pro, which starts at $1,599. With a starting price of at least $1,800, the foldable iPhone would be the most expensive iPhone model ever released, topping the Pro Max at...
iOS 26 on Three iPhones

Here's When to Expect the iOS 26 Public Beta

Tuesday July 15, 2025 11:07 am PDT by
Apple previously announced that a public beta of iOS 26 would be available in July, and now a more specific timeframe has surfaced. Bloomberg's Mark Gurman today said that Apple's public betas should be released on or around Wednesday, July 23. In other words, expect the public betas of iOS 26, iPadOS 26, macOS 26, and more to be available at some point next week. Apple will be releasing...
iPhone 17 Colors

All 15 New iPhone 17 and iPhone 17 Pro Colors Revealed in Latest Leak

Wednesday July 16, 2025 6:50 am PDT by
We may finally have a definitive list of all color options for the iPhone 17 series, ahead of the devices launching in September. MacRumors concept In a report for Macworld today, Filipe Espósito said he obtained an "internal document" that allegedly reveals all of the color options for the upcoming iPhone 17, iPhone 17 Air, iPhone 17 Pro, and iPhone 17 Pro Max models. The report includes ...
iPhone 17 Air Thumb 2 Blue Electric Boogaloo

iPhone 17 Air's Limited Battery Capacity Leaked

Friday July 18, 2025 12:03 pm PDT by
The battery capacity of Apple's rumored iPhone 17 Air will be below the 3,000 mAh mark, according to a recent post from Instant Digital, an account with more than 1.4 million followers on Chinese social media platform Weibo. Thanks to iOS 26's new Adaptive Power Mode, though, the account said that the iPhone 17 Air should achieve full-day battery life. A previous rumor pegged the iPhone...
Generic iPhone 17 Feature With Full Width Dynamic Island

iPhone 17 Series Is Less Than Two Months Away: Everything We Know

Friday July 18, 2025 4:23 am PDT by
Apple is expected to hold its annual iPhone announcement event during the week of September 8, 2025, with September 9 or 10 emerging as the most likely dates. Like the iPhone 16 series, this year's lineup is expected to include four models – but with a twist. The ‌Plus device is being replaced with an all-new ultra-thin model, while the iPhone 17 Pro and ‌iPhone 17 Pro‌ Max are set to...
iPhone 17 Pro in Hand Feature Lowgo

iPhone 17 Pro Coming Soon With These 16 New Features

Friday July 11, 2025 12:40 pm PDT by
Apple's next-generation iPhone 17 Pro and iPhone 17 Pro Max are only two months away, and there are plenty of rumors about the devices. Below, we recap key changes rumored for the iPhone 17 Pro models. Latest Rumors These rumors surfaced in June and July:A redesigned Dynamic Island: It has been rumored that all iPhone 17 models will have a redesigned Dynamic Island interface — it might ...

Top Rated Comments

vipergts2207 Avatar
17 months ago

Unless I am mistaken, this is NOT a 3D-printed Mac. The outer plastic shell was 3D-printed. But everything else was salvaged or replacement/upgraded parts. If he did print all the non-plastic (metal) parts, he didn't show him doing so in this video. And he didn't show how he printed the plastic parts like the wiring shell, the integrated circuit boards, and buttons, etc. If I'm wrong, please let me know and maybe a timestamp in the video where he shows/talks about these discrepancies I listed.

Impressive that he did all this, but I think it's extremely misleading to title this article "Check Out This Functional 3D Printed Macintosh".
Do you actually think you can 3D print a working screen and processor or are you just being pedantic?
Score: 19 Votes (Like | Disagree)
psxp Avatar
17 months ago
WOW! :D amazing!
Score: 5 Votes (Like | Disagree)
vipergts2207 Avatar
17 months ago

That's my point...as far as I am aware, you cannot print screens and processors with a 3D printer. There are 3D printers that print metal but I've never seen them in use and don't know their limitations.

I don't think I'm being pedantic about this...it was a question that I honestly wanted to know based on the article title, the 40 weeks of work it took, and the long video showing how he did it plus the hype from MR. The title of the article (and the youtube video) is quite misleading when all he 3D printed was the shell (as far I can tell) which probably took 1-2 weeks out of the 40 weeks of work. If that's the case (no pun intended), he might as well have just grabbed a Mac case and polished it up and used that instead of 3D printing one.
So being pedantic it is. Also, have you ever done any CAD work?
Score: 5 Votes (Like | Disagree)
kingtj1971 Avatar
17 months ago
As someone who recently really got into 3D printing? Yeah, this is insane, but very cool!
I can't figure out how to get anything useful done in Fusion 360, to be honest, and I find Blender a big struggle. TinkerCAD is about my speed to create simple designs to print for people.

Luckily, I can find what I need already designed someplace, 99% of the time, so just wind up scaling a print up or down a bit, or doing minor things to one to get what I'm after.
Score: 2 Votes (Like | Disagree)
JosephAW Avatar
17 months ago
Still have half a dozen actual working units. They have way too much time in their hands. :p
Score: 2 Votes (Like | Disagree)
motorazr Avatar
17 months ago
This is a work of art. The detail and care in execution is amazing;
Score: 2 Votes (Like | Disagree)