Apple today updated its online store to offer several new Mophie products, including the Powerstation Pro, GaN 120W Charger, and multiple car chargers.
Priced at $150, the Mophie Powerstation Pro offers 20,000mAh for charging iPhones, iPads, and other Apple devices. It offers up to 45W, so it is able to charge a MacBook Air, plus it can fast charge the iPhone and the iPad.
There are dual USB-C PD ports for charging two devices at one time, and Mophie says that it offers 72 hours of additional battery life on an iPhone and eight hours for a MacBook.
Available for $100, the Mophie Speedport 120W GaN Wall Charger includes three USB-C PD ports and one USB-A port for charging up to four Apple devices at one time. It provides a total of 120W, which can be split across the devices being charged.
A single device using the first USB-C port can access up to 100W, while two USB-C ports can provide charging power starting at 99W. It is made using Galium Nitride (GaN) technology to keep the size compact, and it comes with a 2m USB-C to USB-C cable.
Apple is also offering several different Mophie Car Chargers, all of which plug into the 12V auxiliary power outlet in a vehicle.
Mophie Dual (USB-C/USB-A) 32W PD Car Charger ($30) - Offers a USB-C port and a USB-A port. The USB-C port delivers up to 20W and the USB-A port provides up to 12W when both ports are used.
All of the new Mophie products can be purchased as of today, with most delivering by next week. Many Apple retail stores are also now offering these Mophie accessories.
Use 3.7 volts for a lithium battery's average native voltage.
Some batteries are run at a higher voltage though, so you have to check with what the battery's design voltage is. For instance, the Magsafe battery from Apple ran at double the voltage so it had half the amp-hourage of its competitors but people didn't get that the voltage it's run at is double (though in fairness it was a bit small compared to competitors too, but it's a pretty slim battery with up to 15 watts of Magsafe charging capability when plugged in, no one has that in that compact a package).
This one is likely quoting its 3.7 volt nominal average. So it's 3.7 * 20 Ah = 74 watt-hour energy.
Amp-hour is kind of stupid as a system. Watt-hour is better, though joule is the "real" SI unit that should've been used originally.
It's a measure of capacity regardless of voltage. It's useful in some areas like, say, RC hobbies, or places where we care about battery capacities if only in a theoretical sense. We use LiPo batteries (I build FPV quads for years now) predominantly and care very much about mAh values (and the TSA cares about their Wh values haha).
E.g. a 5,000mAh battery means "pulling 5,000 mA from this battery constantly for one hour will reduce its voltage to its nominal value". Similarly you could theoretically pull 1,000mA for 5 hours and reduce the battery to its nominal voltage.
Of course one needs to understand wtf an Ampere actually is for this to be meaingful, suffice to say "unit of electrical current".
So a 6,000mAh battery will have "more capacity" than a 5,000mAh battery -- assuming same operating conditions and without regard for their nominal voltages.
I feel usage of mAh is very much marketing tactic, similar to usage of "megapixels" and storage sizes that are base-10 instead of base-2. ¯\(ツ)/¯
Originally announced at CES back in January, the U.S. version of Anker's highly anticipated 736 USB charger is now available through Amazon for $75.99 in black/silver.
Using Anker's GaN II technology, the 100-watt 736 charger is 34% smaller than Apple's 96-watt charger, yet offers the flexibility of three USB ports to charge multiple devices when needed.
The 736 includes two USB-C ports...
Mophie today announced the release of two new ultra-compact USB-C chargers designed for iPhones, iPads, and Macs, with 30W and 67W options available. Mophie's 67W charger (front) vs. Apple's 67W charger (back) Designed with GaN (gallium nitride) material, the chargers are smaller, lighter, and more power efficient than traditional silicon-based chargers, including Apple's own 30W and 67W...
Apple is indeed testing iPhones that are equipped with USB-C ports instead of Lightning ports, according to Bloomberg's Mark Gurman. Apple does not plan to make the switch from Lightning to USB-C until 2023 at the earliest, with this year's iPhones continuing to offer a Lightning port.
We first heard about a potential swap to USB-C from Apple analyst Ming-Chi Kuo, who earlier this week said...
While the iPhone still uses the Lightning connector for now, Apple has been transitioning many of its devices to USB-C in recent years.
Apple now offers USB-C ports on every Mac that it currently sells, ranging from the MacBook Air to the Mac Pro. Other devices with a USB-C port include the 2018 and newer iPad Pro, 2020 and newer iPad Air, sixth-generation iPad mini, Studio Display, and Pro...
Apple's transition from its proprietary Lightning connector to USB-C appears set to continue with the iPhone 15 and the next entry-level iPad model.
In early May, Apple analyst Ming-Chi Kuo said his latest supply chain survey indicated that at least one new iPhone 15 model will feature a USB-C port in the second half of 2023. Shortly after Kuo shared this information, Bloomberg's Mark Gurman ...
ChargerLAB today shared alleged images of Apple's unreleased 35W power adapter with dual USB-C ports, providing a first look at the accessory's potential design.
The images suggest that the charger will have a compact design with side-by-side USB-C ports, foldable prongs, and circular indents that would provide extra grip for removing the charger from a power outlet. 35W would be suitable...
After showing off the world's first iPhone with a fully functional USB-C port last year, engineering student Ken Pillonel has now created custom AirPods with a USB-C charging case instead of Apple's proprietary Lightning connector.
Pillonel told The Verge that he managed to design a custom flexible PCB that allowed him to fit the necessary USB-C charging hardware inside the AirPods case, and ...
Apple may be planning to introduce a two-port 35W USB-C charger in the near future, based on a leaked support document that was found by 9to5Mac. The support document was apparently only on Apple's site for a brief time, but there was a clear mention of the unreleased charger. Apple's current 30W power adapter As there is no dual USB-C port power adapter available right now, it may be...
Apple's second-generation AirPods Pro are finally nearing launch, with a release expected later this year. If you are considering upgrading to the new AirPods Pro once they are released, keep reading for a list of five new features to expect.
In addition to all-new features, the second-generation AirPods Pro will likely adopt some features added to the standard AirPods last year.
H2 Chip
...
Apple's rumored 10th-generation iPad is currently in production and will feature "major" design changes, according to a report from Taiwanese website DigiTimes.
A mockup of the potential 10th-generation iPad design by Renders By Shailesh The report did not provide any specific details about the 10th-generation iPad's new design, but rumors suggest the device will feature a larger 10.5-inch...
Monday August 15, 2022 10:04 am PDT by Juli Clover
Apple today seeded the sixth betas of upcoming iOS 16 and iPadOS 16 updates to developers for testing purposes, with the updates coming a week after Apple released the fifth developer betas.
Registered developers can download the iOS and iPadOS 16 profiles from the Apple Developer Center, and once installed, the betas will be available over the air.
iOS 16 introduces a revamped Lock...
There's just about a month to go until Apple holds its annual September event focusing on new iPhone and Apple Watch models. We thought we'd take a quick look at everything that's rumored for Apple's September event to give MacRumors readers a rundown on what to expect when the first fall event rolls around.
iPhone 14
The iPhone 14 can probably be described more as an "iPhone 13S" because...
The Apple Watch SE was announced in September 2020 and has been a popular Apple Watch model for customers looking for their first smartwatch or an affordable Apple Watch. Apple Watch SE customers may be wondering, however, what's in store for them with the upcoming Apple Watch Series 8 and what new features they can expect. Continue reading to find out. Apple Watch SE vs. Apple Watch Series ...
It's crazy to think about, but next month will mark five years since Apple announced the Apple Watch Series 3. Despite being a severely antiquated smartwatch, the Series 3 has remained at the bottom of Apple's lineup for $199.
Suppose you're still holding on to your Apple Watch Series 3. In that case, this article will list all the major new features and changes you'll get if you decide to...
Wednesday August 17, 2022 9:51 am PDT by Juli Clover
Apple is aiming to hold its first fall event on Wednesday, September 7, reports Bloomberg's Mark Gurman. The event will focus on the iPhone 14 models and the Apple Watch Series 8.
The standard iPhone 14 models are expected to get few changes, but the iPhone 14 Pro models will include updated camera technology, the removal of the notch in favor of a pill-shaped and hole-punch cutout, an A16...
Top Rated Comments
And the Anker one has more ports.
Some batteries are run at a higher voltage though, so you have to check with what the battery's design voltage is. For instance, the Magsafe battery from Apple ran at double the voltage so it had half the amp-hourage of its competitors but people didn't get that the voltage it's run at is double (though in fairness it was a bit small compared to competitors too, but it's a pretty slim battery with up to 15 watts of Magsafe charging capability when plugged in, no one has that in that compact a package).
This one is likely quoting its 3.7 volt nominal average. So it's 3.7 * 20 Ah = 74 watt-hour energy.
Amp-hour is kind of stupid as a system. Watt-hour is better, though joule is the "real" SI unit that should've been used originally.
I'm loyal to the Anker brand.
E.g. a 5,000mAh battery means "pulling 5,000 mA from this battery constantly for one hour will reduce its voltage to its nominal value". Similarly you could theoretically pull 1,000mA for 5 hours and reduce the battery to its nominal voltage.
Of course one needs to understand wtf an Ampere actually is for this to be meaingful, suffice to say "unit of electrical current".
So a 6,000mAh battery will have "more capacity" than a 5,000mAh battery -- assuming same operating conditions and without regard for their nominal voltages.
I feel usage of mAh is very much marketing tactic, similar to usage of "megapixels" and storage sizes that are base-10 instead of base-2. ¯\(ツ)/¯