iFixit Launches FixHub Portable USB-C Soldering System to Encourage Repair Projects

As part of its longstanding efforts to encourage users to repair their electronic devices and other items, iFixit is announcing FixHub, a USB-C soldering iron and portable power station designed to allow all types of users to handle soldering work wherever they may be.

ifixit fixhub soldering station
The Portable Power Station serves as the command and power center for FixHub, including a 55-watt-hour battery to support over eight hours of continuous soldering on a single charge. The power supply delivers up to 100 watts to a pair of USB-C ports, allowing it to run two soldering irons simultaneously, and the fact that it's simply a USB-C power output device means you can also use it to power or recharge an array of devices like phones.

The solidly built power station includes a handy display to show the status of your soldering iron, along with a convenient dial for adjusting the power being delivered to the iron, supporting temperatures up to 400ºC (750ºF). A flip-up bracket raises the front of the power station a bit to make the display easier to see while in use, while attachment points on the left and right side allow you to clip on the soldering iron's cap for convenient access as a stand.

ifixit fixhub front photo
A USB-C port on the rear of the power station allows for up to 45 watts of input to recharge the station, and iFixit says it is safe to leave continuously connected to power so it's ready whenever you need it.

The soldering iron itself is designed with ergonomics in mind, with a comfort pencil-like grip with a short Bevel 1.5 tip for precise heat control. Additional tips will be sold separately, including Cone, Wedge 1.5, Point, Bevel 2.6, Knife 2.5, and Knife 1.4, with more potentially being added in the future depending on demand. Once turned on, the iron is ready to begin soldering in under five seconds.

ifixit fixhub iron
Safety features are key to the FixHub experience, with a configurable automatic sleep mode, a heat-resistant protective cap for the iron that snaps on magnetically, and gyroscope-powered fall detection that automatically turns off the iron if it is dropped or knocked off a table. An LED status light ring on the iron itself makes it obvious when the iron is hot, shining blue when below 40ºC (100ºF) and safe to touch, purple when actively heating or cooling and not safe to touch, or orange when at the set temperature and ready to solder.

While pairing the soldering iron with iFixit's power station is the preferred setup, you can use the soldering iron on its own with any sufficiently powerful USB-C power source. The set temperature for the iron can be adjusted by plugging into the USB-C port on a computer and accessing the iron's settings via a browser (Chrome, Edge, or Brave required).

ifixit fixhub rear photo
iFixit is of course known for more than just hardware, and it has hundreds of free soldering guides on its website, ranging from the basics of soldering to specific repair projects.

It also wouldn't be an iFixit product without repairability being front of mind, so the FixHub system is designed to allow for easy repairs and iFixit will be releasing a number of guides to help users replace batteries, repair parts, and more.

Supplementing the FixHub is an optional Portable Soldering Toolkit, which provides an extensive set of tools and consumables to get you going on soldering projects.

ifixit fixhub soldering toolkit

  • Flush Cutter: Perfect for trimming leads and cutting electrical wires and plastic materials.
  • Wire Stripper: Features multiple holes for different wire sizes and a spring-assisted mechanism for easy use.
  • Fixite Spudger: An improvement on our much-loved universal pry tool, made of Fixite, an iFixit-developed material blend specially formulated with improved heat resistance for handling soldering materials.
  • Precision Angled Tweezers: Fine-tip tweezers for manipulating wire and components in tight spaces.
  • Silicone Work Mat: A heat-resistant mat that protects your work surface.
  • Chemical Dispensing Pen: Ideal for dispensing isopropyl alcohol for cleaning flux residues.
  • No-Clean Flux: Improves soldering by removing oxides and promoting better solder flow.
  • Silicon Electrical Tape: Perfect for insulating wires without the need for additional tools.
  • Safety Glasses: Essential eye protection while soldering.
  • Lead-Free Solder: Environmentally friendly solder in a convenient tube.
  • Desoldering Wick: Easily removes unwanted solder with a copper mesh.
  • Soldering Splint: A magnetic, hands-free tool to hold wires and components securely in place.
  • Soldering Tip Cleaner: Keeps your soldering tip in optimal condition with brass wool.

The Portable Soldering Station with the soldering iron and battery pack is priced at $249.95 / €269.95, while the full toolkit included the iron, battery pack, pliers, and other tools is $299.95 / €329.95.

The USB Smart Soldering Iron can also be purchased on its own for $79.95 / €84.95 if you need an additional one or want to use one without the iFixit power supply. Shipping begins on October 15 in the United States, Canada, Australia, and Europe.

Tag: iFixit

Popular Stories

maxresdefault

Apple Releases iOS 18.4 With Priority Notifications, Ambient Music, New Emoji and More

Monday March 31, 2025 10:03 am PDT by
Apple today released iOS 18.4 and iPadOS 18.4, the fourth major updates to the iOS 18 and iPadOS 18 operating system updates that came out last year. iOS 18.4 and iPadOS 18.4 come two months after Apple released iOS 18.3 and iPadOS 18.3. Subscribe to the MacRumors YouTube channel for more videos. The new software can be downloaded on eligible iPhones and iPads over-the-air by going to...
iOS 19 Mock WWDC25 Feature

iOS 19 Expected to Run on These iPhones

Monday March 31, 2025 5:28 pm PDT by
iOS 19 will not be available on the iPhone XR, iPhone XS, or the iPhone XS Max, according a private account on social media site X that has accurately provided information on device compatibility in the past. The iPhone XR, iPhone XS, and iPhone XS Max all have an A12 Bionic chip, so it looks like iOS 19 will discontinue support for that chip. All other iPhones that run iOS 18 are expected...
iPhone 17 Pro 34ths Perspective

iPhone 17 Pro Launching Later This Year With These 10 New Features

Sunday March 23, 2025 10:00 am PDT by
While the iPhone 17 Pro and iPhone 17 Pro Max are not expected to launch until September, there are already plenty of rumors about the devices. Below, we recap key changes rumored for the iPhone 17 Pro models as of March 2025: Aluminum frame: iPhone 17 Pro models are rumored to have an aluminum frame, whereas the iPhone 15 Pro and iPhone 16 Pro models have a titanium frame, and the iPhone ...
AirPods Pro Firmware Feature

Apple Releases New Firmware for AirPods Pro 2 and AirPods 4

Monday March 31, 2025 11:27 am PDT by
Apple today released new firmware updates for all AirPods 4 and AirPods Pro 2 models. The new firmware is version 7E93, up from the 7B21 firmware that was installed on the AirPods Pro 2 and the 7B20 firmware available on the AirPods 4 and AirPods 4 with ANC. It is not immediately clear what new features or changes are included in the new firmware, but we'll update this article should we find ...
top stories 2025 03 29

Top Stories: WWDC 2025 Announced, iPhone 17 Pro and iOS 19 Rumors, and More

Saturday March 29, 2025 6:00 am PDT by
Apple's big developer event is a little over two months away, and rumors about what we can expect to see in Apple's next major operating system updates are becoming increasingly frequent. A public release of iOS 18.4 is also imminent with a number of updates and improvements, although we won't be getting the major Apple Intelligence Siri upgrades that had reportedly been planned for this...
iOS 19 visionOS UI Elements

Apple Codename Provides Clue About iOS 19's Rumored New Design

Sunday March 30, 2025 6:40 am PDT by
Multiple sources have claimed that iOS 19 will introduce a new design with more translucent buttons, menus, notification banners, and more, and there is now another clue that points towards this glass-like appearance. Bloomberg's Mark Gurman today said the new design project is codenamed "Solarium" internally. A solarium is a room with glass walls that allow in plenty of sunlight, so this...
macOS Sequoia Feature

Apple Releases macOS Sequoia 15.4 With Mail Categorization and More

Monday March 31, 2025 10:04 am PDT by
Apple today released macOS Sequoia 15.4, the fourth major update to the macOS Sequoia operating system that launched in September. macOS Sequoia 15.4 comes two months after the launch of macOS Sequoia 15.3. Mac users can download the ‌‌macOS Sequoia‌‌ update through the Software Update section of System Settings. It is available for free on all Macs able to run macOS 15. With...
Magic Mouse Green

What to Expect From the Magic Mouse 3

Saturday March 29, 2025 10:15 am PDT by
Apple is reportedly working on a new Magic Mouse. Below, we recap what to expect. The two key rumors for the Magic Mouse 3 so far include a relocated charging port, along with a more ergonomic design. It was briefly rumored that the Magic Mouse 3 would also feature voice control, but that was misinterpreted information. Relocated Charging Port While the Magic Mouse switched from...

Top Rated Comments

Alwaysfindsaway Avatar
7 months ago
For €330 I could just get my device fixed by a professional.. ?
Score: 13 Votes (Like | Disagree)
Belisama Avatar
7 months ago
I really like iFixit, their tutorials and their tools.
But $250 for a "soldering station"... seriously ?
It's priced like an Apple product.
Score: 9 Votes (Like | Disagree)
ridgero Avatar
7 months ago
Hold my Pinecil! ?
Score: 7 Votes (Like | Disagree)
satchmo Avatar
7 months ago
Nice to have...but steep price.
Score: 6 Votes (Like | Disagree)
nt5672 Avatar
7 months ago

For €330 I could just get my device fixed by a professional.. ?
Once.
Score: 4 Votes (Like | Disagree)
HylianKnight Avatar
7 months ago
My most used toolbox is my iFixit toolbox. Just saying.
Score: 4 Votes (Like | Disagree)